Troubles with Set Signal Properties
Posted: Fri Sep 21, 2018 3:57 am
Hi,
On the "set signal properties" you write on the user manual that :
- Available Min/Max actions values are 2 bytes values .
- But on the frame description you write that Min/Max actions are 1 bytes values
I also find that there missing 3 bytes on the frames description.
Including Address, header and CRC, the user manual gives 50 bytes from the frame.
But i only success to set signals when i add 3 more bytes in the frame [53 bytes for the whole frame]
For now, i only needed to set simple signal :
- PIN
- TYPE
- MODE
- TARGET
So, i set all the others bytes to 0, but i plan to use more complex and nice signal properties !
So my questions are :
- What are the 3 missing bytes ?
- Min/Max actions are 2 bytes values ?
Best Regards
Pierre
On the "set signal properties" you write on the user manual that :
- Available Min/Max actions values are 2 bytes values .
- But on the frame description you write that Min/Max actions are 1 bytes values
I also find that there missing 3 bytes on the frames description.
Including Address, header and CRC, the user manual gives 50 bytes from the frame.
But i only success to set signals when i add 3 more bytes in the frame [53 bytes for the whole frame]
For now, i only needed to set simple signal :
- PIN
- TYPE
- MODE
- TARGET
So, i set all the others bytes to 0, but i plan to use more complex and nice signal properties !
So my questions are :
- What are the 3 missing bytes ?
- Min/Max actions are 2 bytes values ?
Best Regards
Pierre