Re: displayspeed() not reading speeds correctly
Posted: Wed Aug 10, 2016 9:06 am
I think you ment V5 of the hardware. We never had a V1.5 of any Roboclaw.
Please confirm the firmware version. You must have the 4.1.16 or 4.1.19 version to use with the current libraries.
A "failed" on a read can be caused by an invalid checksum. I suggest you try other read commands(eg getversion). if that also failes, use IonMotion to find out the firmware versions and update it.
Please confirm the firmware version. You must have the 4.1.16 or 4.1.19 version to use with the current libraries.
A "failed" on a read can be caused by an invalid checksum. I suggest you try other read commands(eg getversion). if that also failes, use IonMotion to find out the firmware versions and update it.