Search found 3 matches

by zdwiel
Wed Sep 20, 2023 12:51 pm
Forum: General Discussion
Topic: error led blinks 8x, not in the user manual
Replies: 3
Views: 1580

Re: error led blinks 8x, not in the user manual

Thanks for the error/warn messages. As for your questions: - We are using the latest firmware - motor specs: 24V custom brushed motors. They consume about 170 W with no load, 900 W fully loaded. We don't have winding resistance/inductance measured yet - battery power specs: 24V 80A power supply + Li...
by zdwiel
Mon Sep 18, 2023 9:20 am
Forum: General Discussion
Topic: error led blinks 8x, not in the user manual
Replies: 3
Views: 1580

Re: error led blinks 8x, not in the user manual

After running a few more experiments, there is a potentially related problem which is that even when I set max current to 60A, I frequently get max current errors at around 35A or 40A. I have the motors freely turning and controlled via a 0.25 hz sin wave. It will run for a few minutes and then stop...
by zdwiel
Thu Sep 14, 2023 3:33 pm
Forum: General Discussion
Topic: error led blinks 8x, not in the user manual
Replies: 3
Views: 1580

error led blinks 8x, not in the user manual

The following reliably occurs on my Roboclaw 2x45 when rapidly increasing duty cycle request: - The status starts at 0, everything OK. - Then it moves on to code 1073741824, which is 0x40000000, and not in the user manual - After 70ms, the error code switches to 0x40011000 - After 10ms, it then swit...