Rockwell PLC to solo 30A controller

General discussion of using Roboclaw motor controllers
Post Reply
User avatar
Basicmicro Support
Posts: 1594
Joined: Thu Feb 26, 2015 9:45 pm
Re: Rockwell PLC to solo 30A controller

Post by Basicmicro Support »

I do not know if you can do what you want, but I recommend you contact Rockwell about general purpose serial communciations functions. If the PLC can not do these it will not work for your application. If it can that should at least get you started.

The main problem you will have is RS-485 is half duplex. If uses the same lines for transmit and receive. You will need a converter from RS-485 to RS-242 or TTL asynconous serial.

Post Reply