Roboclaw CRC Errors during getting encoders

General discussion of using Roboclaw motor controllers
Post Reply
User avatar
Basicmicro Support
Posts: 1594
Joined: Thu Feb 26, 2015 9:45 pm
Re: Roboclaw CRC Errors during getting encoders

Post by Basicmicro Support »

You are getting this because the GETERROR/GETSTATUS command has changed. See this post: viewtopic.php?f=2&t=924

You will need to modify the python code in the ROS Node to use the changed GETERRORS command.

Post Reply