EPROM broken

General discussion of using Roboclaw motor controllers
Post Reply
PdoubleU
Posts: 12
Joined: Mon Aug 20, 2018 7:05 am

EPROM broken

Post by PdoubleU » Sun Sep 09, 2018 4:08 am

Hi,
I am trying to store and restore all the settings (duty acceleration, PID settings etc.) to the eprom using advanced packet serial.
Like the manual said I am using the command 94 and 95. But different to the manual the roboClaw is not replying by sending 0xFF. Instead it is sending nothing. Am I doning something wrong, or might the EPROM be broken.

User avatar
Basicmicro Support
Posts: 1272
Joined: Thu Feb 26, 2015 9:45 pm

Re: EPROM broken

Post by Basicmicro Support » Mon Sep 10, 2018 9:48 am

Yes. The WriteNVM command has been changed to prevent acidentally running it. If you need to programatically save the NVM settings instead of using IonStudio please contact support@basicmicro.com directly.

Post Reply