Solo used for RC sailplane

General discussion of using Roboclaw motor controllers
Post Reply
User avatar
Basicmicro Support
Posts: 1594
Joined: Thu Feb 26, 2015 9:45 pm
Re: Solo used for RC sailplane

Post by Basicmicro Support »

Roboclaw does not currenyl have an explicit reverse disable. The default mode is to set the zero power point based on the intiial state on power up. So if you have your throttle all the way down on startup it will set that as the 0 power point and the motor will only move forward. However if you powered up with the throttle all the way up the motor would only move in reverse.

Post Reply