Page 1 of 1

Return on command 52

Posted: Thu May 02, 2019 9:24 am
by PdoubleU
Hello,

I am trying to use command 52.
(ddress, 52, Duty(2bytes), Acceleration (2Bytes), CRC(2Bytes).
The roboclaw just returns nothing. Is there anything wrong in your manual?
Nearly all other command work exactelly as described.

Best

Re: Return on command 52

Posted: Thu May 02, 2019 10:15 am
by Basicmicro Support
It appears to be a typo. Accel should be 4 bytes(eg a 32bit value).