Tune RC 2x7A by Serial/Python?

Questions about using encoders with the Roboclaw product line
Post Reply
User avatar
Basicmicro Support
Posts: 1594
Joined: Thu Feb 26, 2015 9:45 pm
Re: Tune RC 2x7A by Serial/Python?

Post by Basicmicro Support »

Autotuning is the one function that can only be done through the USB and Motion Studio. The Roboclaw only executes low level routines and the autotuner brains are all in the Motion Studio software.

I recommend sending the damaged controller in to have the connector replaces. I recommend NOT trying to replace it yourself unless you are an expert at soldering SMT parts.

Post Reply