Work without encoder
- Basicmicro Support
- Posts: 1594
- Joined: Thu Feb 26, 2015 9:45 pm
Re: Work without encoder
Any of the duty cycle commands work without the encoders required. Only the speed and position commands require the encoders.
When the red led is blinking that indicates an error. Count the blinks(should be 1 or more with an approx 1 second pause after the blink sequence. Also let me know which Stat led is turned on.
When the red led is blinking that indicates an error. Count the blinks(should be 1 or more with an approx 1 second pause after the blink sequence. Also let me know which Stat led is turned on.