Work without encoder

Questions about using encoders with the Roboclaw product line
Post Reply
User avatar
Basicmicro Support
Posts: 1594
Joined: Thu Feb 26, 2015 9:45 pm
Re: Work without encoder

Post by Basicmicro Support »

Any of the duty cycle commands work without the encoders required. Only the speed and position commands require the encoders.

When the red led is blinking that indicates an error. Count the blinks(should be 1 or more with an approx 1 second pause after the blink sequence. Also let me know which Stat led is turned on.

Post Reply