Solo 60 with Arduino

Post your own projects using Roboclaw motor controllers
Post Reply
User avatar
Basicmicro Support
Posts: 1594
Joined: Thu Feb 26, 2015 9:45 pm
Re: Solo 60 with Arduino

Post by Basicmicro Support »

I would need to see the examples you are running. Solo functions identically compared with the dual channel controllers except for having only one channel.

The reason you are seeing the behavior you are in RC mode is because by default RC mode auto-calibrates to the intial RC pulses sent to it. You can disable autocalibrate by enabling MCU mode. After enabling MCU mode you should be able to get consistent results with RC mode/arduino.

Post Reply