RoboClaw 2x7 not powering RC reciever
- Basicmicro Support
- Posts: 1594
- Joined: Thu Feb 26, 2015 9:45 pm
Re: RoboClaw 2x7 not powering RC reciever
Yes, the 2x7A Roboclaw should be able to power an RC receiver(anyone I've ever used anyway). If the board itself is working then please check the 5v pins on the board with a multimeter to make sure they are powered. If not, the board may be damaged and need to be sent in for repaired/replacement. If there is 5v then the problem may be in the wires to the reciever or the receiver itself but if it is workin on the 2x15 I suspect something wrong with the board.