Return on command 52

General discussion of using Roboclaw motor controllers
Post Reply
PdoubleU
Posts: 12
Joined: Mon Aug 20, 2018 7:05 am
Return on command 52

Post by PdoubleU »

Hello,

I am trying to use command 52.
(ddress, 52, Duty(2bytes), Acceleration (2Bytes), CRC(2Bytes).
The roboclaw just returns nothing. Is there anything wrong in your manual?
Nearly all other command work exactelly as described.

Best
User avatar
Basicmicro Support
Posts: 1594
Joined: Thu Feb 26, 2015 9:45 pm
Re: Return on command 52

Post by Basicmicro Support »

It appears to be a typo. Accel should be 4 bytes(eg a 32bit value).

Post Reply