Unpopulated boards?

General discussion of using Roboclaw motor controllers
Post Reply
User avatar
Basicmicro Support
Posts: 1594
Joined: Thu Feb 26, 2015 9:45 pm
Re: Unpopulated boards?

Post by Basicmicro Support »

Unfortunately no there is not. We can not ship both populated and unpopulated versions.

I usually recommend two alternatives. 1: Use a 2xX pin .1" spaced female header. Here is a link to ones available from AdaFruit. The more populated pins the stronger the hold.

https://www.adafruit.com/product/3143.

Uses these jumper wires:

https://www.adafruit.com/product/3142

Alternatively you can go with the 2x45 Screwterminal version of the Roboclaw.

A third option is to plug your wires in and then zip tie them with some relief nearby or to one of the Roboclaw mounting holes.

Post Reply