False Overcurrent Warning
Posted: Sun May 16, 2021 10:51 pm
Hello everyone, I am using RoboClaw 2X45A for an AGV we are working on. I realized an unexpected behaviour with the driver. Motor 2 Channel is misreading the current flowing through motor and warning about overcurrent situation eventhough there is none. Driver says there is 5Amps of current but ampermeter reading is 500mA, and motor can not reach the commanded speed. When i apply a torque to the motor externally(try to move the wheel with my hand), helping it to turn, misreading disappears and driver works perfectly until it stops. After motor stops i send the command to turn the motor again and problem reoccurs. This happens every second or third try, other times it works perfectly. I changed the motors connected to channel 1 and 2, channel 2 kept giving OC error while channel 1 works perfectly so I assume it is not about the motors. I also have another RoboClaw 2x45A which is working with another AGV that we built which is working perfectly for months now. Firmware version is 4.1.34(latest available). I have no idea about how to solve problem or what the problem is. Do you have an idea? Is there any way you can help me? Thanks in advance.