Re: Unpopulated boards?
Posted: Thu Nov 14, 2019 9:30 am
Unfortunately no there is not. We can not ship both populated and unpopulated versions.
I usually recommend two alternatives. 1: Use a 2xX pin .1" spaced female header. Here is a link to ones available from AdaFruit. The more populated pins the stronger the hold.
https://www.adafruit.com/product/3143.
Uses these jumper wires:
https://www.adafruit.com/product/3142
Alternatively you can go with the 2x45 Screwterminal version of the Roboclaw.
A third option is to plug your wires in and then zip tie them with some relief nearby or to one of the Roboclaw mounting holes.
I usually recommend two alternatives. 1: Use a 2xX pin .1" spaced female header. Here is a link to ones available from AdaFruit. The more populated pins the stronger the hold.
https://www.adafruit.com/product/3143.
Uses these jumper wires:
https://www.adafruit.com/product/3142
Alternatively you can go with the 2x45 Screwterminal version of the Roboclaw.
A third option is to plug your wires in and then zip tie them with some relief nearby or to one of the Roboclaw mounting holes.